IP66 NEMA 4X PC+ABS Weatherproof Miner Enclosures Powered by Solar Energy (60W) -V2 (Free Shipping US)
$624.00
Shipping calculated at checkout.
Compatible with all Helium Miners
To order more than 5 Units, please contact us at info@iotoffgrid.com
Order: Shipments in 4 Weeks
Features
-
100% Powered by Solar
Our enclosures are 100% powered by Solar Panels with built in charge controllers programmed for your miner.
-
Compatible with any Hotspot
Unit comes with both USB-C and 2.1mm Barrel connector compatible with all the major Helium Hotspots.
-
Plug and Play
Plug in your miner* and screw in some bolts and you are ready to mine in less than 30 mins.
-
Weatherproof
Our IP66 NEMA 4X enclosures are 100% weatherproof. Use this enclosure anywhere without worrying about heat or rain.
- 500 Battery Lifecycles
- Operation Temperature: -10 to 60 Degrees Celsius (14 to 140 Degrees Fahrenheit)
*Miner and cell modem/MiFi not available
IMPORTANT: This unit carries a 20Ahr Lithium Ion Polymer battery which is the minimum practical capacity
for a Helium Hotspot and Cell Modem(such as RUT240). Make sure the capacity is suitable for your location
and climate. If you require more capacity please contact our support.
Specifications
Enclosure Module:
- NEMA 1, 2, 4, 4X, 12, 13 and IEC 529 IP65, IP66 certified.
- Dimensions: 15.8" x 11.4" x 5.0" (External) | 11.8 x 8.0" x 4.0”(Internal)
- Weatherproof and UV Stable.
- Durable polycarbonate + ABS.
- Waterproof cable glands
- RF transparent for wireless devices.
- Waterproofing gasketed lid.
- Tamper-proof locking screw with key and provision for padlock
- 5052 Aluminium inner mounting plate.
- Adjustable antenna mount.
Solar Module Panel:
- 60W Peak power(Pmax) generation monocrystalline solar panel.
- Maximum power point Voltage(Vmp): 33.54V
- Maximum power point Current(Imp): 1.89A
- Open circuit voltage(Voc): 39.66V
- Open circuit current(Ioc): 1.99A
- Panel dimensions: 27.95" x 20.08" x 1.18"
Charge Controller:
- Multi-functional LCD display-Operation data and working conditions display.
- Micro PWM solar controller
- Rated charging current: 10A
- Rated discharging current: 5A
- Max solar input voltage: <50V
- Stand-by Lost: <10mA
- System operation voltage: 13.5V
- Operation temperature: -20oC~+50oC
- USB power slot: 5V/2A(max)
Battery Module:
- Lithium-ion battery pack.
- Built-in on/off switch.
- Input voltage: 12.6V
- Input current: 350mA (standard) / 1000mA
- Output voltage: 12.6-10.80V
- Output current: 1-2A
- Battery capacity: 20000 mAh
- Product life cycle: ⩾500
- Battery dimensions: 8.66” x 5.59” x 1.65”
Power Regulation Module:
- Back-lit LCD Display- Operation conditions and temperature display
- Input voltage: 12.6V
- Output voltage: 0.5V-12V
- Output current: upto 4A(max)
- Maximum output power: 35W
- Soft start buttons and easy adjustment knobs.
- Surge protection and DC current control.
- Output interfaces: 5.5 x 2.1mm or USB-C
- Output to power Rut240 or any other cell modem
Structure Module:
- High quality aluminum mounting plates(0.125” thickness).
- 45o angle mount for maximum solar harvesting.
- U bolts to secure to schedule 40 or 80 steel poles of max. diameter of 2".
- Wind load:100 km/hr and Snow loading: 1.1kN/m